Users Guide

如果操作没有成功，getniccfg 子命令会显示相应的错误信息。如果操作成功，输出会按下面的格式显示：
IPv4 settings:
NIC Enabled = 1
DHCP Enabled = 1
IP Address = 10.35.0.64
Subnet Mask = 255.255.255.0
Gateway = 10.35.0.1
IPv6 settings:
IPv6 Enabled = 0
DHCP6 Enabled = 0
IP Address 1 = ::
Prefix Length = 64
Gateway = ::
Link Local Address = ::
IP Address 2 = ::
IP Address 3 = ::
IP Address 4 = ::
IP Address 5 = ::
IP Address 6 = ::
IP Address 7 = ::
IP Address 8 = ::
IP Address 9 = ::
IP Address 10 = ::
IP Address 11 = ::
IP Address 12 = ::
IP Address 13 = ::
IP Address 14 = ::
IP Address 15 = ::

支持的接口
l 本地 RACADM
l 远程 RACADM
l telnet/ssh RACADM
getsvctag
表 A-13 说明了 getsvctag 子命令。
表 A-13.getsvctag

注： 只有 iDRAC6 支持 IPv6 时才显示 IPv6 信息。

子命令

定义
getsvctag
显示服务标签。