Users Guide

98 Configuring iDRAC6 Enterprise Using the Web Interface
NOTE: To redirect the serial console over the LAN, ensure that the SOL Baud
Rate is identical to your managed server’s baud rate.
e
Click Apply .
f Configure IP filtering and blocking settings as needed in the
Advanced Settings page.
Adding and Configuring iDRAC6 Users
To manage your system with iDRAC6 and maintain system security, create
unique users with specific administrative permissions (or role-based authority).
To add and configure iDRAC6 users, perform the following steps:
NOTE: You must have Configure iDRAC permission to perform the following steps.
1 Click System → Remote Access → iDRAC6 → Network/Security → Users .
The
Users screen displays each user’s User ID, State, User Name,
IPMI LAN Privileges, iDRAC6 Privileges, and Serial Over LAN capability.
NOTE: User-1 is reserved for the IPMI anonymous user and is not configurable.
2 In the User ID column, click a user ID number.
3 On the User Configuration screen, configure the user’s properties and
privileges.
Table 5-9 describes the
General settings for configuring an iDRAC6 user
name and password.
Table 5-10
describes the IPMI LAN Privileges for configuring the user’s
LAN privileges.
Table 5-11
describes the User Group permissions for the IPMI LAN
Privileges
and iDRAC6 User Privileges settings.
Table 5-12
describes the iDRAC Group permissions. If you add an iDRAC
User Privilege
to the Administrator , Power User , or Guest User , iDRAC6
Group
will change to the Custom group.
4 When completed, click Apply .
5 Click the appropriate button to continue. See Table 5-13.