Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 91
Gateway Configures the static IPv6 gateway for the iDRAC6 NIC. To
change this setting, you must first disable Autoconfiguration
Enable by deselecting the associated checkbox.
Use DHCPv6 to
obtain DNS Server
addresses
Enable DHCP to obtain IPv6 DNS server addresses by selecting
the Use DHCPv6 to obtain DNS Server addresses checkbox.
When not using DHCP to obtain the DNS server addresses,
provide the IP addresses in the Preferred DNS Server and
Alternate DNS Server fields. The default is Unchecked.
NOTE: When the Use DHCPv6 to obtain DNS Server addresses
checkbox is selected, IP addresses cannot be entered into the
Preferred DNS Server and Alternate DNS Server fields.
Preferred DNS
Server
Configures the static IPv6 address for the preferred DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Alternate DNS
Server
Configures the static IPv6 address for the alternate DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Table 5-3. IPMI Settings
Setting Description
Enable IPMI
Over LAN
When selected, indicates that the IPMI LAN channel is enabled.
The default is Unchecked.
Channel
Privilege Level
Limit
Configures the maximum privilege level for the user that can be
accepted on the LAN channel. Select one of the following options:
Administrator, Operator, or User. The default is Administrator.
Encryption Key Configures the encryption key.
Table 5-2. Network Settings (continued)
Setting Description