Users Guide

88 Configuring iDRAC6 Enterprise Using the Web Interface
Configuring iDRAC6 NIC
This section assumes that iDRAC6 has already been configured and is
accessible on the network. See "Configure iDRAC6 Networking" for help with
the initial iDRAC6 network configuration.
Configuring the Network, IPMI and VLAN Settings
NOTE: You must have Configure iDRAC6 privilege to perform the following steps.
NOTE: Most DHCP servers require a server to store a client identifier token in its
reservations table. The client (iDRAC6, for example) must provide this token during
DHCP negotiation. iDRAC6 supplies the client identifier option using a one-byte
interface number (0) followed by a six-byte MAC address.
1 Click System → Remote Access → iDRAC6 .
2 Click the Network/Security tab.
The
Network screen appears.
3 Configure the Network, IPMI, and VLAN settings as needed. See
Table 5-2, Table 5-3, and Table 5-4 for descriptions of the
Network, IPMI ,
and
VLAN Settings options.
4 Click Apply .
5 Click the appropriate button to continue.
Table 5-1. User Privilege Behavior in Supported Browsers
Browser Tab Behavior Window Behavior
Microsoft Internet
Explorer 6
Not applicable New session
Microsoft IE7 and IE8 From latest session opened New session
Firefox 2 and Firefox 3 From latest session opened From latest session opened
Table 5-2. Network Settings
Setting Description
Network Interface Card Settings