Users Guide

RACADM Subcommand Overview 367
Input
Table A-37 describes the testtrap subcommand options.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh RACADM
vmdisconnect
Synopsis
racadm vmdisconnect
Description
The vmdisconnect subcommand allows a user to disconnect another user's
virtual media session. Once disconnected, the Web interface will reflect the
correct connection status.
Table A-36. cfg e-mail Alert Commands
Action Command
Enable the alert racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertEnable -i 1 1
Set the destination
e-mail IP address
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
View the current test trap
settings
racadm getconfig -g cfgIpmiPet -i
<index>
where <index> is a number from 1 to 4
Table A-37. testtrap Subcommand Options
Option Description
-i Specifies the index of the trap configuration to use for the test Valid
values are from 1 to 4.