Users Guide

366 RACADM Subcommand Overview
Output
Success: Test email sent successfully
Failure: Unable to send test email
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
testtrap
Table A-35 describes the testtrap subcommand.
Synopsis
racadm testtrap -i < index >
Description
The testtrap subcommand tests iDRAC6 SNMP trap-alerting feature by
sending a test trap from iDRAC6 to a specified destination trap listener on
the network.
Before you execute the testtrap subcommand, ensure that the specified index
in the RACADM cfgIpmiPet group is configured properly.
Table A-36 provides a list and associated commands for the cfgIpmiPet
group.
Table A-34. testemail Subcommand Option
Option Description
-i Specifies the index of the e-mail alert to
test.
Table A-35. testtrap
Subcommand Description
testtrap Tests iDRAC6 SNMP trap-alerting feature.