Users Guide

346 RACADM Subcommand Overview
Examples
• racadm getsysinfo -A -s
"System Information:" "PowerEdge M600" "0.2.1"
"0.32" "48192" "dell-x92i38xc2n" "" "ON"
• racadm getsysinfo -w -s
System Information:
System Model = PowerEdge M600
System BIOS Version = 0.2.1
BMC Firmware Version = 0.32
Service Tag = 48192
Host Name = dell-x92i38xc2n
OS Name =
Power Status = ON
Watchdog Information:
Recovery Action = None
Present countdown value = 0 seconds
Initial countdown value = 0 seconds
Restrictions
The Hostname and OS Name fields in the getsysinfo output display accurate
information only if Dell OpenManage Server Administrator is installed on the
managed server. If it is not installed on the managed server, these fields may
be blank or inaccurate. An exception to this are VMware
®
operating system
names which are displayed even if Server Administrator is not installed on the
managed system.
getractime
Table A-10 describes the getractime subcommand.
Table A-10. getractime
Subcommand Definition
getractime Displays the current time from the remote access
controller.