Users Guide

Recovering and Troubleshooting the Managed System 331
How can I find
the IP address of
CMC?
From iDRAC6 Web interface:
• Click System → Remote Access → CMC .
The CMC IP address is displayed on the CMC
Summary screen.
From the iKVM:
• Select the "Dell CMC" console in the OSCAR to log in to the
CMC through a local serial connection. CMC RACADM
commands can be issued from this connection. See the
Dell
Chassis Management Controller Administrator Reference Guide
for a complete list of the CMC RACADM subcommands
$ racadm getniccfg -m chassis
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.151
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
NOTE: The above action can also be performed with remote
RACADM.
iDRAC6 network
connection is
not working.
• Ensure that the LAN cable is connected to the CMC.
• Ensure that NIC settings, IPv4 or IPv6 settings, and either Static
or DHCP is enabled for your network.
I inserted the
server into the
chassis and
pressed the
power button,
but nothing
happened.
• iDRAC6 requires upto 2 minutes to initialize before the server
can power up.
• Check the CMC power budget. The chassis power budget may
be exceeded.
Table 20-13. Frequently Asked Questions/Troubleshooting (continued)
Question Answer