Users Guide

302 Using iDRAC6 Configuration Utility
DNS Server 1 If DNS Servers from DHCP is Off, enter the IP address of the
first DNS server.
DNS Server 2 If DNS Servers from DHCP is Off, enter the IP address of the
second DNS server.
IPv6 Settings
IPv6 Enable or disable support for the IPv6 connection.
IPv6 Address Source Select between AutoConfig and Static. When AutoConfig is
selected, the IPv6 Address 1, Prefix Length, and Default
Gateway fields are obtained from DHCP.
When Static is selected, the IPv6 Address 1, Prefix Length,
and Default Gateway items become editable.
IPv6 Address 1 If the IP Address Source is set to AutoConfig, this field
displays the IP address obtained from DHCP.
If the IP Address Source is set to Static, enter the IP address
you want to assign to iDRAC6.
Prefix Length Configures the Prefix length of the IPv6 address. It can be a
value between 1 an 128, inclusive.
Default Gateway If the IP Address Source is set to AutoConfig, this field
displays the IP address of the default gateway obtained from
DHCP.
If the IP Address Source is set to Static, enter the IP address of
the default gateway.
IPv6 Link-local
Address
This is the non-editable IPv6 Link-local Address of iDRAC6
network interface.
IPv6 Address 2-15 This is the non-editable IPv6 Address 2...IPv6 Address 15 of
iDRAC6 network interface.
DNS Servers from
DHCPv6
Select On to retrieve DNS server addresses from a DHCP
service on the network. Select Off to specify the DNS server
addresses below.
DNS Server 1 If DNS Servers from DHCP is Off, enter the IP address of the
first DNS server.
Table 19-1. LAN Parameters (continued)
Item Description