Users Guide

Using the RACADM Command Line Interface 243
gettracelog Displays iDRAC6 trace log. If used with -i, the command
displays the number of entries in iDRAC6 trace log.
help Lists iDRAC6 subcommands.
help <subcommand> Lists usage statement for the specified subcommand.
ifconfig Displays the contents of the network interface table.
krbkeytabupload Uploads a Kerberos keytab file.
localconredirdisable Performs local kVM disable from the local system.
netstat Displays the routing table and the current connections.
ping Verifies that the destination IP address is reachable from
iDRAC6 with the current routing-table contents. A
destination IP address is required. An ICMP echo packet is
sent to the destination IP address based on the current
routing-table contents.
ping6 Verifies that the destination IPv6 address is reachable from
iDRAC6 with the current routing-table contents. A
destination IPv6 address is required. An ICMP echo packet is
sent to the destination IPv6 address based on the current
routing-table contents.
racdump Displays status and general iDRAC6 information.
racreset Resets iDRAC6.
racresetcfg Resets iDRAC6 to the default configuration.
remoteimage Remote file share
serveraction Performs power management operations on the
managed server.
setniccfg Sets the IP configuration for the controller.
sshpkauth Enables you to upload up to 6 different SSH public keys,
delete existing keys, and view the keys already in the CMC.
sslcertdownload Downloads a CA certificate.
sslcertupload Uploads a CA certificate or server certificate to iDRAC6.
sslcertview Views a CA certificate or server certificate in iDRAC6.
Table 15-1. RACADM Subcommands (continued)
Command Description