Users Guide

186 Power Monitoring and Power Management

–

Reset System (warm boot)

reboots the system without powering off.

This option is disabled if the system is already powered off.

–

Power Cycle System (cold boot)

powers off and then reboots the system.

This option is disabled if the system is already powered off.

Click

Apply

A dialog box appears requesting confirmation.

Click

to execute the power management action you selected.

Using RACADM

To perform power actions from local RACADM, enter the below command at a

command prompt:

racadm serveraction <action>

where <action> is powerup, powerdown, powercycle, hardreset,

or powerstatus.

NOTE: For more information about serveraction, including output details,

see "serveraction."