Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 111
Standard Schema
Settings
Select this option if you want to use Standard Schema with
Active Directory.
Click Next to display the Step 4a of 4 Active Directory
Configuration and Management page.
Global Catalog Server Address 1-3:
Enter the fully qualified domain name (FQDN) or the IP
address of the Global Catalog server(s). At least one of the 3
addresses is required to be configured. iDRAC6 attempts to
connect to each of the configured addresses one-by-one
until a successful connection is made. The Global Catalog
server is required for standard schema only in the case that
the user accounts and the role groups are in different
domains.
Role Groups: Specifies the list of role groups associated with
iDRAC6.
Group Name: Specifies the name that identifies the role
group in the Active Directory associated with iDRAC6.
Group Domain: Specifies the group domain type where the
Role Group resides.
Group Privilege: Specifies the group privilege level.
These settings will be displayed only if iDRAC6 has been
configured for use with a Standard Active Directory
Schema.
Table 5-24. Role Group Privileges
Setting Description
Role Group Privilege Level Specifies the user’s maximum iDRAC6 user
privilege as one of the following:
Administrator, Power User, Guest User, None,
or Custom.
See Table 5-25 for Role Group permissions.
Login to iDRAC Allows the group login access to iDRAC6.
Table 5-23. Active Directory Configuration Settings (continued)
Setting Description