Users Guide

96 Configuring iDRAC6 Enterprise Using the Web Interface
After the CA approves the CSR and sends the certificate, upload the
certificate to the iDRAC6 firmware. The CSR information stored on iDRAC6
firmware must match the information contained in the certificate.
Accessing the SSL Main Menu
1 Click System → Remote Access → iDRAC , then click the Network/
Security
tab.
2 Click SSL to open the SSL Main Menu screen.
Use the SSL Main Menu screen to generate a CSR to send to a CA. The CSR
information is stored on the iDRAC6 firmware.
Table 5-13 describes the options available when generating a CSR.
Table 5-14 describes the available buttons on the SSL Main Menu screen.
Table 5-13. SSL Main Menu Options
Field Description
Generate a New
Certificate Signing
Request (CSR)
Select the option and click Next to open the Generate
Certificate Signing Request (CSR) screen.
NOTE: Each new CSR overwrites any previous CSR on the
firmware. For a CA to accept your CSR, the CSR in the
firmware must match the certificate returned from the CA.
Upload Server
Certificate
Select the option and click Next to open the Certificate
Upload screen and upload the certificate sent to you by
the CA.
NOTE: Only X509, Base 64-encoded certificates are accepted
by iDRAC6. DER-encoded certificates are not accepted.
View Server Certificate Select the option and click Next to open the View Server
Certificate screen and view an existing server certificate.