Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 91
d Update the IPMI SOL baud rate, if needed, by selecting a data speed
from the Baud Rate drop-down menu.
NOTE: To redirect the serial console over the LAN, ensure that the SOL baud
rate is identical to your managed server’s baud rate.
e
Click Apply .
Adding and Configuring iDRAC6 Users
To manage your system with iDRAC6 and maintain system security, create
unique users with specific administrative permissions (or role-based authority).
To add and configure iDRAC6 users, perform the following steps:
NOTE: You must have Configure iDRAC permission to perform the following steps.
1 Click System → Remote Access → iDRAC and then click the Network/
Security
tab.
2 Open the Users screen to configure users.
The
Users screen displays each user’s User ID, State, Username,
IPMI LAN Privileges, iDRAC Privileges, and Serial Over LAN.
NOTE: User-1 is reserved for the IPMI anonymous user and is not configurable.
3 In the User ID column, click a user ID number.
4 On the User Configuration screen, configure the user’s properties and
privileges.
Table 5-8 describes the
General settings for configuring an iDRAC6 user
name and password.
Ta b le 5 - 9
describes the IPMI LAN Privileges for configuring the user’s
LAN privileges.
Table 5-10
describes the User Group permissions for the IPMI LAN
Privileges
and the iDRAC User Privileges settings.
Table 5-11
describes the iDRAC Group permissions. If you add an iDRAC
User Privilege
to the Administrator , Power User , or Guest User , the
iDRAC Group will change to the Custom group.
5 When completed, click Apply .
6 Click the appropriate button to continue. See Table 5-12.