Users Guide

90 Configuring iDRAC6 Enterprise Using the Web Interface
Configuring IPMI Over LAN
1 Log in to the iDRAC6 Web interface.
2 Configure IPMI over LAN:
a Click System → Remote Access → iDRAC , and then click the
Network/Security tab.
The
Network Configuration screen appears.
b Click IPMI LAN Settings .
c Select the Enable IPMI Over LAN check box.
d Update the IPMI LAN channel privileges, if required:
NOTE: This setting determines the IPMI commands that can be executed
from the IPMI over LAN interface. For more information, see the IPMI 2.0
specifications.
Under IPMI LAN Settings , click the Channel Privilege Level Limit
drop-down menu, select
Administrator , Operator , or User , and then
click
Apply .
e Set the IPMI LAN channel encryption key, if required.
NOTE: The iDRAC6 IPMI supports the RMCP+ protocol.
NOTE: The encryption key must consist of an even number of hexadecimal
characters with a maximum length of 20 characters.
Under IPMI LAN Settings in the Encryption Key field , enter the
encryption key.
f Click Apply .
3 Configure IPMI Serial over LAN (SOL):
a Click System → Remote Access → iDRAC , and then click the
Network/Security tab.
The
Network Configuration screen appears.
b Open the Serial Over LAN screen.
c Select the Enable Serial Over LAN check box.