Users Guide

60 Configuring iDRAC6 Enterprise
5 In the IPMI LAN Privilege section, ensure that Maximum LAN User
Privilege Granted
is set to Administrator .
6 Set other user privileges as needed.
7 Click Apply to save the new User settings.
Using IT Assistant to View iDRAC6 Status and Events
After discovery is complete, the iDRAC6 devices appear in the Servers
category of the ITA Devices detail screen, and iDRAC6 information can be
seen by clicking on the iDRAC6 name. This is different than DRAC5 systems,
where the management card shows up in the RAC group. This is due to the
fact that iDRAC6 uses IPMI discovery as opposed to SNMP.
iDRAC6 error and warning traps can now be seen in the primary Alert Log of
IT Assistant. They will show up in the Unknown category, but the trap
description and severity will be accurate.
For more information on using IT Assistant to manage your data center,
see the Dell OpenManage IT Assistant User's Guide.