Users Guide

398 iDRAC6 SM-CLP Property Database
Description
Used to attach virtual devices to the system via the USB bus, allowing the
server to recognize valid USB mass storage devices attached to the system.
This is equivalent to attaching a local USB CDROM/floppy drive to
a USB port on the system. When the devices are attached, you then can
connect to the virtual devices remotely using the iDRAC6 Web interface or
the CLI. Setting this property to 0 causes the devices to detach from the
USB bus.
oemdell_singleboot (Read/Write)
Legal Values
0 (Disabled)
1 (Enabled)
Default
0
Description
Enables or disables the virtual media boot-once feature of iDRAC6. If this
property is enabled when the host server is rebooted, the server attempts to
boot from the virtual media devices.
oemdell_floppyemulation (Read/Write)
Legal Values
0 (Disabled)
1 (Enabled)
Default
0