Users Guide

328 RACADM Subcommand Overview
Supported Interfaces
• Local RACADM
testtrap
Table A-35 describes the testtrap subcommand.
Synopsis
racadm testtrap -i < index >
Description
The testtrap subcommand tests the iDRAC6 SNMP trap-alerting feature by
sending a test trap from iDRAC6 to a specified destination trap listener on
the network.
Before you execute the testtrap subcommand, ensure that the specified index
in the RACADM cfgIpmiPet group is configured properly.
Table A-36 provides a list and associated commands for the cfgIpmiPet
group.
Table A-35. testtrap
Subcommand Description
testtrap Tests the iDRAC6 SNMP trap-alerting feature.
Table A-36. cfg e-mail Alert Commands
Action Command
Enable the alert racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertEnable -i 1 1
Set the destination
e-mail IP address
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
View the current test trap
settings
racadm getconfig -g cfgIpmiPet -i
<index>
where <index> is a number from 1 to 4