Users Guide

314 RACADM Subcommand Overview
Description
The racreset subcommand issues a reset to iDRAC6. The reset event is
written into the iDRAC6 log.
Examples
• racadm racreset
Start the iDRAC6 soft-reset sequence.
Supported Interfaces
• Local RACADM
racresetcfg
Table A-15 describes the racresetcfg subcommand.
Synopsis
racadm racresetcfg
Supported Interfaces
• Local RACADM
Description
The racresetcfg command removes all user-configured database property
entries. The database has default properties for all entries that are used to
restore iDRAC6 back to the default settings.
NOTE: This command deletes your current iDRAC6 configuration and resets
iDRAC6 configuration to the default settings. After reset, the default name and
password are root and calvin, respectively, and the IP address is 192.168.0.120 plus
the number of the slot the server inhabits in the chassis.
Table A-15. racresetcfg
Subcommand Definition
racresetcfg Resets the entire RAC configuration to factory default values.