Users Guide

RACADM Subcommand Overview 313
getsvctag
Table A-13 describes the getsvctag subcommand.
Synopsis
racadm getsvctag
Description
The getsvctag subcommand displays the service tag of the host system.
Example
Enter getsvctag at the command prompt. The output is displayed as follows:
Y76TP0G
The command returns 0 on success and nonzero on errors.
Supported Interfaces
•Local RACADM
racreset
Table A-14 describes the racreset subcommand.
NOTE: When you issue a racreset subcommand, iDRAC6 may require up to one
minute to return to a usable state.
Synopsis
racadm racreset
Table A-13. getsvctag
Subcommand Definition
getsvctag Displays a service tag.
Table A-14. racreset
Subcommand Definition
racreset Resets iDRAC6.