Users Guide

312 RACADM Subcommand Overview
Supported Interfaces
• Local RACADM
getniccfg
Table A-12 describes the getniccfg subcommand.
Synopsis
racadm getniccfg
Description
The getniccfg subcommand displays the current NIC settings.
Sample Output
The getniccfg subcommand will display an appropriate error message if the
operation is not successful. Otherwise, on success, the output is displayed in
the following format:
NIC Enabled = 1
DHCP Enabled = 1
IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
Supported Interfaces
• Local RACADM
Table A-12. getniccfg
Subcommand Definition
getniccfg Displays the current IP configuration for iDRAC6.