Users Guide

302 RACADM Subcommand Overview
config
Table A-2 describes the config and getconfig subcommands.
Synopsis
racadm config [-c|-p] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i
<
index >] < value >
Supported Interfaces
• Local RACADM
Description
The config subcommand allows you to set iDRAC6 configuration parameters
individually or to batch them as part of a configuration file. If the data is
different, that iDRAC6 object is written with the new value.
Input
Table A-3 describes the config subcommand options.
Table A-2. config/getconfig
Subcommand Definition
config Configures iDRAC6.
getconfig Gets iDRAC6 configuration data.
Table A-3. config Subcommand Options and Descriptions
Option Description
-f The -f <filename> option causes config to read the contents of the file
specified by <filename> and configure iDRAC6. The file must contain data
in the format specified in "Configuration File Syntax" on page 237.
-p The -p, or password, option directs config to delete the password entries
contained in the config file -f <filename> after the configuration is complete.
-g The -g <groupName>, or group, option must be used with the -o option.
The <groupName> specifies the group containing the object that is to be set.