Users Guide

298 Recovering and Troubleshooting the Managed Server
How can I find
the IP address of
the CMC?
From the iDRAC6 Web interface:
• Click System → Remote Access → CMC .
The CMC IP address is displayed on the
Summary screen.
OR
• Select the "Dell CMC" console in the OSCAR to log in to the
CMC through a local serial connection. CMC RACADM
commands can be issued from this connection. Refer to the
CM
C Firmware User Guide for a complete list of the CMC
RACADM subcommands.
$ racadm getniccfg -m chassis
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.151
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
The iDRAC6
network
connection is
not working.
• Ensure the LAN cable is connected to the CMC.
• Ensure the iDRAC6 LAN is enabled.
I inserted the
server into the
chassis and
pressed the
power button,
but nothing
happened.
• iDRAC6 requires about 30 seconds to initialize before the server
can power up. Wait for 30 seconds and then press the power
button again.
• Check the CMC power budget. The chassis power budget may
be exceeded.
Table 17-17. Frequently Asked Questions/Troubleshooting (continued)
Question Answer