Users Guide

Using the iDRAC6 Configuration Utility 273
Cancel System Services
Use the left-arrow and right-arrow keys to select Yes or No.
When you select Yes, all Unified Server Configurator sessions are closed,
and the server restarts when you Save and Exit to apply the new settings.
LAN User Configuration
The LAN user is the iDRAC6 administrator account, which is root by default.
Press <Enter> to display the LAN User Configuration submenu. When you
have finished configuring the LAN user, press <Esc> to return to the
previous menu.
Reset to Default
Use the Reset to Default menu item to reset all of iDRAC6 configuration
items to the factory defaults. This may be required, for example, if you have
forgotten the administrative user password or if you want to reconfigure
iDRAC6 from the default settings.
NOTE: In the default configuration, iDRAC6 networking is disabled. You cannot
reconfigure the iDRAC6 over the network until you have enabled the iDRAC6
network in the iDRAC6 Configuration Utility.
Table 16-2. Lan User Configuration Screen
Item Description
Account Access Select Enabled to enable the administrator account.
Select Disabled to disable the administrator account.
Account Privilege Select between Admin, User, Operator, and No Access.
Account User Name Press <Enter> to edit the user name and press <Esc> when
you have finished. The default user name is root.
Enter Password Enter the new password for the administrator account.
The characters are not echoed on the display as you enter them.
Confirm Password Re-enter the new password for the administrator account.
If the characters you enter do not match the characters you
entered in the Enter Password field, a message displays and
you must re-enter the password.