Users Guide

244 Using iDRAC6 Enterprise SM-CLP Command Line Interface
• Active Directory configuration
• iDRAC6 LAN configuration
• SSL Certificate Signature Request (CSR) generation
• Virtual media configuration
• Serial over LAN (SOL) redirection over Telnet or SSH
iDRAC6 SM-CLP Support
SM-CLP is hosted from iDRAC6 firmware, and supports telnet and SSH
connections. The iDRAC6 SM-CLP interface is based on the SM-CLP
Specification Version 1.0 provided by the DMTF organization.
The following sections provide an overview of the SM-CLP feature that is
hosted from iDRAC6.
SM-CLP Features
The SM-CLP specification provides a common set of standard SM-CLP verbs
that can be used for simple systems management through the CLI.
SM-CLP promotes the concept of verbs and targets to provide system
configuration capabilities through the CLI. The verb indicates the operation
to perform and the target determines the entity (or object) that runs the
operation.
The following is the syntax of the SM-CLP command line:
<verb> [<options>] [<target>] [<properties>]