Users Guide

Using the Local RACADM Command Line Interface 221
Using the RACADM Utility to Configure iDRAC6
This section describes how to use RACADM to perform various iDRAC6
configuration tasks.
Displaying Current iDRAC6 Settings
The RACADM getconfig subcommand retrieves current configuration
settings from iDRAC6. The configuration values are organized into groups
containing one or more objects, and the objects have values.
See "iDRAC6 Enterprise Property Database Group and Object Definitions"
for a complete description of the groups and objects.
To display a list of all iDRAC6 groups, enter this command:
racadm getconfig -h
To display the objects and values for a particular group, enter this command:
racadm getconfig -g < group >
localconredirdisable Performs local kVM disable from the local system.
racreset Resets iDRAC6.
racresetcfg Resets iDRAC6 to the default configuration.
serveraction Performs power management operations on the
managed server.
setniccfg Sets the IP configuration for the controller.
sslcertdownload Downloads a CA certificate.
sslcertupload Uploads a CA certificate or server certificate to iDRAC6.
sslcertview Views a CA certificate or server certificate in iDRAC6.
sslcsrgen Generates and downloads the SSL CSR.
testemail Forces iDRAC6 to send an e-mail over the iDRAC6 NIC.
testtrap Forces iDRAC6 to send an SNMP alert over the
iDRAC6 NIC.
vmkey Resets the virtual media key to the default size of 256MB.
Table 13-1. RACADM Subcommands (continued)
Command Description