Users Guide

210 Configuring and Using Virtual Media
3 Click the Console/Media tab.
The
Console Redirection and Virtual Media screen appears.
To change the values of any of the displayed attributes, see "Configuring
Virtual Media."
NOTE: The Floppy Image File under Floppy Drive (if applicable) may appear,
as this device can be virtualized as a virtual floppy. You can select one optical
drive and one floppy at the same time, or a single drive.
NOTE: The virtual device drive letters on the managed server do not coincide
with the physical drive letters on the management station.
NOTE: Virtual Media may not function properly on Windows operating system
clients that are configured with Internet Explorer Enhanced Security.
To resolve this issue, see your Microsoft operating system documentation or
contact your administrator.
4 Click Launch Viewer .
NOTE: On Linux, the file jviewer.jnlp is downloaded to your desktop and a
dialog box will ask what to do with the file. Choose the option to Open with
program and then select the javaws application, which is located in the bin
subdirectory of your JRE installation directory.
The iDRACView application launches in a separate window.
5 Select Media → Virtual Media Wizard…
The Media Redirection Wizard appears.
6 View the Status window at the bottom of the Wizard screen. If media is
connected, you must disconnect it before connecting a different media
source. To disconnect media, click the
Disconnect button next to the
media in the
Status window.
7 Select the radio button next to the media types you want to connect.
You can select both the
Floppy Image radio button and one of the radio
buttons in the
CD/DVD Drive section.
To connect a floppy image or ISO image, enter the path to the image
location on your local computer, or click the
Browse button to navigate to
the image location.