Users Guide

208 Configuring and Using Virtual Media
Configuring Virtual Media
1 Log in to the iDRAC6 Web interface.
2 Click the Console/Media tab.
3 Click Configuration , and then click Virtual Media .
The
Console Redirection Configuration screen appears.
4 Click Virtual Media .
5 In the Virtual Media section, select values for the settings. See Table 12-2
for information on
Virtual Media configuration values.
6 Click Apply to save your settings.
An alert dialog appears with the following message:
You are about
to change device configuration. All existing
redirection sessions will be closed. Do you want
to continue?
7
Click OK to continue.
An alert dialog appears with the following message:
Virtual Media
Configuration successfully set.
Table 12-2. Virtual Media Configuration Values
Attribute Value
Attach Virtual Media Attach — Immediately attaches Virtual Media to the
server.
Detach — Immediately detaches Virtual Media from
the server.
Auto-Attach — Attaches Virtual Media to the server
only when a virtual media session is started.
Maximum Sessions Displays the maximum number of Virtual Media
sessions allowed. This value is always 1.
NOTE: Only one virtual media user session is allowed;
however, multiple devices can be attached in a single
session. See "Running Virtual Media."
Active Sessions Displays the current number of Virtual Media sessions.