Users Guide

152 Viewing the Configuration and Health of the Managed Server
Batteries
The Batteries screen displays the status and values of the system board
coin-cell battery that maintains the Real-Time Clock (RTC) and CMOS
configuration data storage of the managed system.
Temperatures
The Temperature Probes Information screen displays the status and readings
of the on-board ambient temperature probe. Minimum and maximum
temperature thresholds for warning or failure states are shown, along with the
current health status of the probe.
Voltages
The Voltage Probes Information screen displays the status and reading of the
Voltage probes, providing such information as the status of the on-board
voltage rail and CPU core sensors.
NOTE: Depending on the model of your server, temperature thresholds for warning
or failure states and/or the health status of the probe may not be displayed.
Power Monitoring
The Power Monitoring screen enables you to view the following monitoring
and power statistics information:
• Power Monitoring — Displays the amount of power being used (in watts)
by the server as reported by the System Board Current Monitor.
• Power Tracking Statistics — Displays information about the amount of
power used by the system since the
Measurement Start Time was last
reset.
• Peak Statistics — Displays information about the peak amount of power
used by the system since the
Measurement Start Time was last reset.
CPU
The CPU Information screen reports the health of each CPU on the
managed server. This health status is a roll-up of a number of individual
thermal, power, and functional tests.