Users Guide

Viewing the Configuration and Health of the Managed Server 151
• DHCP Enabled — Enabled if iDRAC6 is set to fetch its IP address and
associated info from a DHCP server
• Preferred DNS Address 1 — Set to the currently active primary DNS server
• Alternate DNS Address 2 — Set to the alternate DNS server address
NOTE: This information is also available at iDRAC→ Properties→ iDRAC Information.
WWN/MAC Summary
Click System→ Properties→ WWN/MAC to view the current configuration
of installed I/O Mezzanine cards and their associated network fabrics. If the
FlexAddress feature is enabled, the globally assigned (Chassis-Assigned)
persistent MAC addresses supersede the hardwired values of each LOM.
System Health
Click System→ Properties→ Health to view important information about
the health of iDRAC6 and components monitored by iDRAC6. The Severity
column shows the status for each component. For a list of status icons and
their meaning, see Table 17-3. Click the component name in the Component
column for more detailed information about the component.
NOTE: Component information can also be obtained by clicking the component
name in the left pane of the window. Components remain visible in the left pane
independent of the tab/screen that is selected.
iDRAC6
The iDRAC6 Information screen lists a number of important details about
iDRAC6, such as health status, name, firmware revision, and network
parameters. Additional details are available by clicking the appropriate tab at
the top of the screen.
CMC
The CMC screen displays the health status, firmware revision, and IP address
of the Chassis Management Controller. You can also launch the CMC Web
interface by clicking the Launch the CMC Web Interface button. See the
Chassis Management Controller Firmware User Guide.