Users Guide

Using iDRAC6 With Microsoft Active Directory 135
7 Under Upload Active Directory CA Certificate , enter the file path of the
certificate or browse to find the certificate file, and then click
Upload .
NOTE: You must enter the absolute file path, which includes the full path and
the complete file name and file extension.
The certificate information for the Active Directory CA certificate that you
uploaded appears in the
Current Active Directory CA Certificate section.
8 Click Next.
The
Step 2 of 4 Active Directory Configuration and Management
screen appears.
9 Select the Enable Active Directory check box.
10 Click Add to enter the user domain name, enter the user domain name in
the text field, and then click
OK .
11 In the Timeout field, enter the number of seconds you want iDRAC6 to
wait for Active Directory responses. The default is 120 seconds.
12 Enter the Domain Controller Server Address . You can enter up to three
Active Directory servers for login processing, but you must configure at
least one server by entering the IP address or the fully qualified domain
name (FQDN). iDRAC6 attempts to connect to each configured server
until a connection is established.
13 Click Next .
The
Step 3 of 4 Active Directory Configuration and Management
screen appears.
14 Under Schema Selection , select the Standard Schema check box.
15 Click Next .
The
Step 4a of 4 Active Directory Configuration and Management
screen appears.
16 Under Standard Schema Settings , enter the Global Catalog
Server Address(es).
NOTE: The Global Catalog server is only required for standard schema when
the user accounts and role groups are in different domains. And, in this
multiple domain case, only the Universal Group can be used.
17 Click a Role Group button to add a role group.
The
Step 4b of 4 Configure Role Group 1 screen appears.