Users Guide

132 Using iDRAC6 With Microsoft Active Directory
4 If you want to configure a list of user domains so that you only need to
enter the user name during log in to the iDRAC6 Web-based interface,
enter the following command:
racadm config -g cfgUserDomain -o
cfgUserDomainName -i <index>
You can configure up to 40 user domains with index numbers between
1 and 40.
See "Using Active Directory to Log In to iDRAC6" for details about user
domains.
5 Press Enter to complete the Active Directory configuration with
Extended Schema.
Standard Schema Active Directory Overview
As shown in Figure 6-3, using standard schema for Active Directory
integration requires configuration on both Active Directory and iDRAC6.
Figure 6-3. Configuration of iDRAC6 with Microsoft Active Directory and
Standard Schema
Role
Group
Role
Group Name
and Domain
Name
Role
Definition
User
Configuration on Active
Directory Side
Configuration on
iDRAC Side