Users Guide

108 Configuring iDRAC6 Enterprise Using the Web Interface
Table 5-31. Telnet Settings
Setting Description
Enabled Enables or disables telnet. When checked, telnet is
enabled. The default value is disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Only one session is supported.
Active Sessions The number of current sessions on the system.
Timeout The telnet idle timeout, in seconds. Timeout range is 60 to
10800 seconds. Enter 0 seconds to disable the Timeout
feature. The default is 1800.
Port Number The port on which iDRAC6 listens for a telnet connection.
The default is 23.
Table 5-32. SNMP Agent
Setting Description
Enabled Enables or disables email alerts.
SNMP Community
Name
The name of the community that contains the IP address
for the SNMP Alert destination. The Community Name
may be up to 31 non-blank characters in length.
Default=public.
Table 5-33. Automated System Recovery Agent Setting
Setting Description
Enabled Enables the Automated System Recovery Agent.
Table 5-34. Services Buttons
Button Description
Print Prints the Services screen.
Refresh Refreshes the Services screen.
Apply Changes Applies the Services screen settings.