Users Guide

106 Configuring iDRAC6 Enterprise Using the Web Interface
3 Click Apply .
4 Click the appropriate button to continue. See Table 5-34.
Disabling Local Configuration Access
1 Click System → Remote Access → iDRAC → Network/Security .
2 Under Local Configuration , click to check Disable iDRAC local USER
Configuration Updates
to disable access.
3 Click Apply .
4 Click the appropriate button to continue. See Table 5-34.
Configuring iDRAC6 Services
NOTE: To modify these settings, you must have Configure iDRAC permission.
NOTE: When you apply changes to services, the changes take effect immediately.
Existing connections may be terminated without warning.
NOTE: There is a known issue with the Telnet client supplied with Microsoft
Windows communicating with a BMU. Use another Telnet client such as
HyperTerminal or PuTTY.
1 Click System→ Remote Access→ iDRAC , and then click the Network/
Security
tab.
2 Click Services to open the Services configuration screen.
3 Configure the following services, as required:
• Web server — see Table 5-29 for Web server settings
• SSH — see Table 5-30 for SSH settings
• Telnet — see Table 5-31 for telnet settings
• SNMP Agent — see Table 5-32 for SNMP Agent settings
• Automated System Recovery Agent — see Table 5-33 for Automated
System Recovery Agent settings
4 Click Apply .
5 Click the appropriate button to continue. See Table 5-34.