Users Guide

Configuring iDRAC6 Enterprise Using the Web Interface 101
Configuring Active Directory (Standard Schema and Extended Schema)
1 On the Active Directory Main Menu screen, select Configure Active
Directory
and click Next .
2 On the Active Directory Configuration screen, enter the Active
Directory settings.
Table 5-22 describes the
Active Directory Configuration and
Management
settings.
3 Click Apply to save the settings.
4 Click the appropriate button to continue. See Table 5-23.
5 To configure the Role Groups for Active Directory Standard Schema,
click on the individual Role Group (1-5). See Table 5-24 and Table 5-25.
NOTE: To save the settings on the Active Directory Configuration screen,
click Apply before proceeding to the Custom Role Group screen.
Table 5-21. Active Directory Main Menu Buttons
Button Definition
Print Prints the Active Directory Main Menu values that appear
on the screen.
Refresh Reloads the Active Directory Main Menu screen.
Next Processes the information on the Active Directory Main
Menu screen and continues to the next step.
Table 5-22. Active Directory Configuration Settings
Setting Description
Enable Active
Directory
When checked, enables Active Directory. The default is
disabled.
ROOT Domain Name The Active Directory ROOT domain name. This default
is blank.
The name must be a valid domain name consisting of x.y,
where x is a 1-254 character ASCII string with no spaces
between characters, and y is a valid domain type such as
com, edu, gov, int, mil, net, or org. The default is blank.