Users Guide

ManualsBrandsDell ManualsActive System ManageriDRAC Service Module 4.x

Table 12. Windows Event Message mapped under LC logs monitored under S2D event

correlation (continued)

Windows Event Source - SourceID Windows Event Message Mapped on iDRAC LC Log

StorageSpaces - Drivers - 301 All pool drives failed to read the

configuration or returned corrupt data

for storage space %1. As a result the

storage space will not attach. Return

Code: %2

MessageID : SDS0007

StorageSpaces - Drivers - 302 Majority of the pool drives hosting space

meta-data for storage space %1 failed a

space meta-data update, which caused

the storage pool to go in failed state.

Return Code: %2

MessageID : SDS0008

StorageSpaces - Drivers - 303 Drives hosting data for storage space

have failed or are missing. As a result, no

copy of data is available. Return Code:

MessageID : SDS0009

StorageSpaces - Drivers - 304 One or more drives hosting data for

storage space %1 have failed or are

missing. As a result, at least one copy of

data is not available. However, at least

one copy of data is still available. Return

Code: %2

MessageID : SDS0010

StorageSpaces - Drivers - 306 The attempt to map, or allocate more

storage for, the storage space %1 has

failed. This is because there was a write

failure involved in the updating the

storage space metadata. Return Code:

MessageID : SDS0011

StorageSpaces - Drivers - 307 The attempt to unmap or trim the

storage space %1 has failed. Return

Code: %2

MessageID : SDS0012

NOTE: The Event and Error Message Reference Guide provides information about the event and error information that is

generated by firmware and other agents that monitor system components.

NOTE: PPID field is not recorded for alerts corresponding to a storage pool. iDRAC Service Module will replicate these

alerts into the Lifecycle controller logs in iDRAC with PPID as "NA".

Storage Spaces Direct (S2D) logs collection with SupportAssist Collection

Starting iSM 3.5.1, SupportAssist Collection (SAC) request will collect and package Storage Spaces Direct logs. This feature is

available only on Microsoft windows OS. The SDS Event Correlation feature should be enabled for SAC to include this log

collection report.

S.M.A.R.T logs for disks and Chipset into SupportAssist Collection (SAC)

report

iSM collects the data from the SATA chipset when the SAC is requested in real-time. S.M.A.R.T logs are not stored in iSM. If

iSM is not installed or connected, iDRAC cannot send the previously stored S.M.A.R.T logs to ensure that the configuration

matches.

This feature requires the S.M.A.R.T monitoring feature to be enabled in iSM, and Storage Logs under SupportAssist

Collection preferences is enabled in iDRAC.

iDRAC Service Module monitoring features