Users Guide

Configuring the iDRAC Service Module
You can configure the iDRAC Service Module using the:
● iDRAC web interface
● RACADM CLI command
● WSMAN command
Topics:
• Configuring the iDRAC Service Module from iDRAC Web Interface
• Configuring the iDRAC Service Module from RACADM
• Configuring the iDRAC Service Module from WSMan
Configuring the iDRAC Service Module from iDRAC
Web Interface
To use the iDRAC Service Module from the iDRAC Web interface for yx2x and yx3x servers, go to Overview > Server >
Service Module.
To use the iDRAC Service Module from the iDRAC Web interface for yx4x and yx5x servers, go to iDRAC settings > Settings
> iDRAC Service Module setup.
Configuring the iDRAC Service Module from RACADM
The iDRAC Service Module can be accessed and configured through RACADM CLI commands. To know the status of the
features that are provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This
command lists the features of the iDRAC Service Module and their status. The features are:
● ChipsetSATASupported
● HostSNMPAlert
● HostSNMPGet
● iDRACHardReset
● iDRACSSOLauncher
● LCLReplication
● OSInfo
● ServiceModuleEnable
● SSEventCorrelation
● WatchdogRecoveryAction
● WatchdogResetTime
● WatchdogState
● WMIInfo
To set or configure the features, use racadm set idrac.servicemodule. <feature name> <enabled or
disabled>.
NOTE: The name of the feature or the attribute that are listed starting from an # symbol cannot be modified.
To use the iDRAC Service Module from RACADM, see the objects in the Service Module group in the RACADM Command Line
Reference Guide for iDRAC8, iDRAC9, and CMC available at dell.com/support.
4
Configuring the iDRAC Service Module 25