Release Notes

Workaround: There is no workaround available.

Tracking number: 118654

● Description: When invoking "iDRAC GUI Launcher" for the first time either using iDRACLauncher.sh or using the program

menu shortcut, the following message will be seen in operating system logs.

"localhost dbus-daemon[2369]: [system] Activating via systemd: service

name='net.reactivated.Fprint'unit='fprintd.service'

requested by ':1.18176' (uid=0 pid=126684 comm="sudo -l /opt/dell/srvadmin/iSM/bin/

InvokeiDRACLau"label="unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023")"

Workaround: There is no functional impact. No action is required by the user.

Tracking number: 124514

● Description: If Support Assist Collection(TSR) is triggered on 13G platforms, it is failing under the following conditions,

○ The maser device which is exposed to OS by iDRAC during the SA collection but it is failing to mount /mnt since it is

already mounted by Administrator with read-only file system or no access permission. Once the failure occurs, the

Support assist collection will be blocked by iDRAC for 30 mins.

Workaround:

○ OS root user or Administrator need to unmount /mnt.

(OR)

○ Instead of using /mnt directly as mount point, OS user/Administrator need to create a separate directory under /mnt

and use that directory for their activity.

Tracking number: 146515

Known issues on VMware ESXi

● Description: iDRAC Service Module is not restarting the communication with iDRAC after performing Restart

Management Agents on VMWare ESXi.

Workaround: You have to try performing Restart Management Agents again immediately after the first attempt.

Tracking number: 176426

● Description: When user performs Prepare to Remove operation using the Dell Express Flash NVMe ColdStream P4800x

drive on VMware ESXi 7.0 and ESXi 7.0 U1 operating system, the operation fails.

Workaround: There is no workaround available.

Tracking number: 169748

● Description: Sometimes after updating the iDRAC firmware or BIOS, iSM communication with iDRAC is terminated and the

following log message is logged in the operating system.

ISM0011 : The server operating system (OS) is unable to start the iDRAC Service

Module, because it is set to "disabled" in iDRAC.

Restarting wbem service using the following commands will establish the iSM communication with iDRAC:

*esxcli system wbem set -e 0

* esxcli system wbem set -e 1

Workaround: There is no workaround available.

Tracking number: 167495

● Description: Upgrading an earlier version of ESXi to ESXi 7.0 is failing with iSM VIB installed. In vSphere 7.0, 32-bit

userworld support is deprecated. For more information, see the Deprecation of 32-bit Userworld Support section in VMware

vSphere 7.0 Release Notes and Known issues section in VMware vSphere 7.x on Dell EMC PowerEdge Servers Release

Notes.

Known issues