Users Guide

Conguring the iDRAC Service Module
You can congure the iDRAC Service Module using the:
• iDRAC web interface
• RACADM CLI command
• WSMAN command
Topics:
• Conguring the iDRAC Service Module from iDRAC Web Interface
• Conguring the iDRAC Service Module from RACADM
• Conguring the iDRAC Service Module from WSMan
Conguring the iDRAC Service Module from iDRAC
Web Interface
To use the iDRAC Service Module from the iDRAC Web interface for 12
th
and 13
th
generations of servers, go to Overview > Server >
Service Module.
To use the iDRAC Service Module from the iDRAC Web interface for 14
th
generation of servers, go to iDRAC settings > Settings > iDRAC
Service Module setup.
Conguring the iDRAC Service Module from RACADM
The iDRAC Service Module can be accessed and congured through RACADM CLI commands. To know the status of the features that are
provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists the features of the iDRAC
Service Module and their status. The features are:
• OSInfo
• LCLReplication
• WMI Information
• Auto System Recovery Action
• iDRAC access via Host OS
• iDRACHardReset
• HostSNMPAlert
• HostSNMPGet
• iDRAC SSO Launcher
To set or congure the features, use racadm set idrac.servicemodule. <feature name> <enabled or disabled>.
NOTE
: The name of the feature or the attribute that are listed starting from an # symbol cannot be modied.
To use the iDRAC Service Module from RACADM, see the objects in the Service Module group in the RACADM Command Line Reference
Guide for iDRAC8, iDRAC9, and CMC available at dell.com/support.
4
Conguring the iDRAC Service Module 31