Users Guide

Configuring the iDRAC Service Module
You can configure the iDRAC Service Module using the:
• iDRAC web interface
• RACADM CLI command
• WSMAN command
Topics:
• Configuring the iDRAC Service Module from iDRAC Web Interface
• Configuring the iDRAC Service Module from RACADM
• Configuring the iDRAC Service Module from WSMan
Configuring the iDRAC Service Module from
iDRAC Web Interface
To use the iDRAC Service Module from the iDRAC Web interface for yx3x servers, go to Overview > Server > Service Module.
To use the iDRAC Service Module from the iDRAC Web interface for yx4x and yx5x servers, go to iDRAC settings > Settings > iDRAC
Service Module setup.
Configuring the iDRAC Service Module from
RACADM
The iDRAC Service Module can be accessed and configured through RACADM CLI commands. To know the status of the features that
are provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists the features of
the iDRAC Service Module and their status. The features are:
• OSInfo
• LCLReplication
• WMI Information
• Auto System Recovery Action
• iDRAC access via Host OS
• iDRACHardReset
• HostSNMPAlert
• HostSNMPGet
• iDRAC SSO Launcher
To set or configure the features, use racadm set idrac.servicemodule. <feature name> <enabled or disabled>.
NOTE: The name of the feature or the attribute that are listed starting from an # symbol cannot be modified.
To use the iDRAC Service Module from RACADM, see the objects in the Service Module group in the RACADM Command Line
Reference Guide for iDRAC8, iDRAC9, and CMC available at dell.com/support.
Configuring the iDRAC Service Module from
WSMan
The iDRAC Service Module can be accessed and configured through WSMan using the command
4
24 Configuring the iDRAC Service Module