Users Guide
$ mv 0x1285491434D8786F.asc RPM-GPG-KEY-DELL
3 Import the Dell GPG Key:
$ /opt/xensource/debug/import-update-key RPM-GPG-KEY-DELL
Installing iDRAC Service Module using Citrix XenCenter
management GUI dashboard
Launch compatible Citrix XenCenter and connect to your Citrix XenServer 7.1.
1 Under the Tools menu select Install Update.
2 Click Next to proceed to the Select Update screen.
3 Choose Select Update or supplemental pack from the disk and browse to the iSM supplemental pack ISO le.
4 Check the Citrix XenServer hosts to deploy. Then click Next.
5 Once the message says “Update successfully loaded” click Next.
6 Verify all the Prechecks pass and click Next to select the Update Mode option.
7 Click Install Update.
8 Click Finish.
Installing the iDRAC Service Module using SSH or Local
Command Shell
1 Copy the ISO le to either the Citrix XenServer host or a remote ISO library share mounted to the host. Consult Citrix XenServer
documentation for further details. .
2 Install the supplemental pack:
$ xe-install-supplemental-pack < iDRACServiceModule-supplemental-pack-filename>.iso
NOTE
: Invalid signature while installing Supplemental pack (Update package): If the error “Invalid Signature” occurs during
the iDRAC Service Module supplemental pack installation, the proper Dell GPG Key does not exist in the host signature
database. This is possible on Citrix XenServer 7.1 installation and the key must rst be manually imported to each host. For
more information about importing DELL GPG keys to Citrix XenServer 7.1, see Importing DELL GPG keys to Citrix
XenServer .
Installing iDRAC Service Module when the System
Conguration Lock Down Mode is enabled
When the System Conguration Lock Down Mode is enabled through iDRAC, no conguration operations can be performed for
iDRACService Module. All the features that were enabled before the System Conguration Lock Down Mode was turned on will continue to
be enabled. If iSM is installed after the System Conguration Lock Down Mode is enabled, then only the iSM features that were enabled
earlier will be available for the users. Whenever the System Conguration Lock Down Mode is turned o in iDRAC, then all the
conguration operations can be performed.
Installing the iDRAC Service Module
29