Users Guide

Conguring the iDRAC Service Module from RACADM
The iDRAC Service Module can be accessed and congured through RACADM CLI commands. To know the status of the features
provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists the features and their status of
the iDRAC Service Module:
• OSInfo
• LCLReplication
• WMI Information
• Auto System Recovery Action
• iDRAC access via Host OS
• iDRACHardReset
To set or congure the features, use racadm set idrac.servicemodule. <feature name> <enabled or disabled>.
NOTE
: The name of the feature or the attribute listed starting from an # symbol cannot be modied.
To use the iDRAC Service Module from RACADM, see the objects in the Service Module group in the RACADM Command Line Reference
Guide for iDRAC8 and CMC available at dell.com/support/home.
Conguring the iDRAC Service Module from WSMAN
The iDRAC Service Module can be accessed and congured through WSMAN using the command
To congure the iDRAC Service Module use winrm i ApplyAttributes http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/
DCIM_iDRACCardService?CreationClassName=DCIM_iDRACCardService+Name=DCIM:iDRACCardService
32
Conguring the iDRAC Service Module