Release Notes

Known Issues and Resolutions
Issue 1
Description: If DSET 3.4 or later is running, and iDRAC Service Module is shut down or uninstalled;
a Watchdog Timer Expiry event is observed.
Issue 2
Description: In iDRAC Service Module 2.0, the WMI response size for enumeration of WS-MAN
classes is limited to 800 KB. If the WMI response size exceeds 800 KB, then a Supplied Buffer Too
Small message is displayed. For iDRAC Firmware version 2.00.00, DCIM_LCLogEntry and
DCIM_SELLogEntry are the two classes which may exceed 800 KB over a period of time.
Issue 3
Description: When you try to install iDRAC Service Module 1.0 on iDRAC Service Module 2.0,
Update is completed successfully message is displayed. However, there is no update because an
RPM of a higher version cannot revert to a lower version.
Installation
• To install iDRAC Service Module on Windows Server 2008 R2 SP1 Core, Microsoft
Windows Server 2012 Core and Microsoft Windows Server 2012 R2 Core, Windows-on-
Windows (WOW) mode must be enabled.
• On the Red Hat Enterprise Linux and SUSE Linux Enterprise Server operating systems, to
perform an "Express Install," execute "dcism-setup.sh -x" from the "SYSMGMT/iSM/linux"
directory.
For more information on installation instructions, including silent installation options, see the
"iDRAC Service Module Guide"
Limitation
• Feature Lifecycle Log Replication on OS Log shows one-hour difference in the
EventTimeStamp displayed in OS log, when daylight saving is applied.
• The Automatic OS and Application Data Collection of Technical Support Report is not
supported on CentOS.