Release Notes

○ The iDRAC Service Module will fail to configure the OS to iDRAC Pass-through in the USB NIC mode.
○ If OS to iDRAC Pass-through in the USB NIC mode is already configured, Watchdog feature does not work resulting in
ASR000 event.
iDRAC Service Module functionality is restored when "Local racadm set" is enabled.
● When you use iDRAC Service Module 2.3 for WMI queries over winrm, additional properties with null value is observed. This
does not affect the functionality and it can be ignored.
● If iDRAC Service Module 2.3.0 is installed on a Linux OS with the iDRAC Access via Host OS feature enabled, you have to to
remove the rules of the previous port when upgrading from 2.3.0 to 2.4.0.
● When the iDRAC's USB NIC is not functioning, the iDrac Service Module installer is completing the installation and starting
the iDRAC Service Module process without any notification about the failure to start the communication with the iDRAC.
This issue is observed during iDRAC Service Module is installed using setup.sh command the iDRAC.
Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc.
or its subsidiaries. Other trademarks may be trademarks of their respective owners.
4