Install Guide

7
Conguring the iDRAC Service Module
You can congure the iDRAC Service Module using the:
• iDRAC web interface
• RACADM CLI command
• WSMAN command
Conguring The iDRAC Service Module From iDRAC Web Interface
To use the iDRAC Service Module from the iDRAC Web interface, go to Overview → Server → Service Module.
Conguring the iDRAC Service Module from RACADM
The iDRAC Service Module can be accessed and congured through RACADM CLI commands. To know the status of the features
provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists the features and their
status of the iDRAC Service Module:
• OSInfo
• LCLReplication
• WMI Information
• Auto System Recovery Action
• iDRAC access via Host OS
• iDRACHardReset
To set or congure the features, use racadm set idrac.servicemodule. <feature name> <enabled or disabled>.
NOTE: The name of the feature or the attribute listed starting from an # symbol cannot be modied.
28