Install Guide

3. After the base XenServer image is installed (5–10 minutes depending on the speed of the system), you are prompted to insert

the Supplemental Pack CD. Eject the XenServer installation CD from the optical drive, insert the Supplemental Pack CD and

click OK. The message iSM Supplemental Pack was found is displayed. To conrm installation, click Use and click OK.

NOTE: If you have more than one Supplemental Pack (either the Linux Supplemental Pack from Citrix or other third-

party applications) you can install them in any order, although it is recommended that you install the Supplemental

Pack last.

4. After completing the Supplemental Pack installation (2–5 minutes, depending on the speed of the system), you are prompted to

install other Supplemental Packs. If you do not want to install other supplemental packs, click Skip and press <Enter>. The

XenServer is installed successfully.

When installing RPM packages, to avoid warnings concerning the RPM–GPG key, import the key with a command similar to the

following:

rpm --import<OM DVD mountpoint>SYSMGMT/srvadmin/linux/RPM-GPG-KEY