Install Guide

Configuring the iDRAC Service Module
You can configure the iDRAC Service Module using the:
● iDRAC web interface
● RACADM CLI command
● WSMAN command
Topics:
• Configuring The iDRAC Service Module From iDRAC Web Interface
• Configuring the iDRAC Service Module from RACADM
• Configuring the iDRAC Service Module from WSMAN
Configuring The iDRAC Service Module From iDRAC
Web Interface
To use the iDRAC Service Module from the iDRAC Web interface, go to Overview > Server > Service Module.
Configuring the iDRAC Service Module from RACADM
The iDRAC Service Module can be accessed and configured through RACADM CLI commands. To know the status of the
features provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists
the features and their status of the iDRAC Service Module:
● OSInfo
● LCLReplication
● WMI Information
● Auto System Recovery Action
● iDRAC access via Host OS
● iDRACHardReset
To set or configure the features, use racadm set idrac.servicemodule. <feature name> <enabled or
disabled>.
7
26 Configuring the iDRAC Service Module