Administrator Guide

Configuring The iDRAC Service Module

You can configure the iDRAC Service Module using the:

• iDRAC Web Interface

• RACADM CLI command

• WSMAN command

Configuring The iDRAC Service Module From iDRAC Web Interface

To use the iDRAC Service Module from the iDRAC Web interface, go to Overview → Server → Service Module.

Configuring The iDRAC Service Module from RACADM

The iDRAC Service Module can be accessed and configured through RACADM CLI commands. To know the status of the

features provided by the iDRAC Service Module, use racadm get idrac.servicemodule command. This command lists the

features and their status of the iDRAC Service Module:

• LCLReplication

• OSInfo

• Watchdog

To set or configure the features, use racadm set idrac.servicemodule. <feature name> <enabled or disabled>.

NOTE: The name of the feature or the attribute listed starting from an # symbol cannot be modified.

To use the iDRAC Service Module from RACADM, see the objects in the Service Module group in the

RACADM

Command Line Reference Guide for iDRAC7 and CMC

available at dell.com/esmmanuals.

Configuring The iDRAC Service Module from WSMAN

The iDRAC Service Module can be accessed and configured through WSMAN using the command