Administrator Guide

3. After the base XenServer image is installed (5–10 minutes depending on the speed of the system), you are

prompted to insert the Supplemental Pack CD. Eject the XenServer installation CD from the optical drive, insert the

Supplemental Pack CD and click OK. The message iSM Supplemental Pack was found is displayed. To

confirm installation, click Use and click OK.

NOTE: If you have more than one Supplemental Pack (either the Linux Supplemental Pack from Citrix or other

third-party applications) you can install them in any order, although it is recommended that you install the

Supplemental Pack last.

4. After completing the Supplemental Pack installation (2–5 minutes, depending on the speed of the system), you are

prompted to install other Supplemental Packs. If you do not want to install other supplemental packs, click Skip and

press

<Enter>. The XenServer is installed successfully.

When installing RPM packages, to avoid warnings concerning the RPM–GPG key, import the key with a command

similar to the following:

rpm --import<OM DVD mountpoint>SYSMGMT/srvadmin/linux/RPM-GPG-KEY