User Manual

GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-A231D39F-9132-4613-8D22-3BA540C7830A
Procedure
NOTE: The rubber grommets may get pushed out while replacing the
speaker. Ensure that the rubber grommets are in their position after placing
the speaker on the system board.
1 Using the alignment posts, align and place the speaker on the system board.
2 Replace the rubber grommets if they are pushed up while replacing the speaker.
GUID-35A6ECFC-8F40-4EBE-809C-CD3C09A05D89
Post-requisites
1 Follow the procedure from step 3 to step 12 in “Replacing the system board”.
2 Replace the fans.
3 Replace the I/O board.
4 Follow the procedure from step 2 to step 6 in “Replacing the palm-rest
assembly”.
5 Replace the keyboard.
6 Replace the wireless card.
7 Replace the solid-state drive.
8 Replace the memory modules.
9 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
78